Author Archives: Bart
Wat kunnen ondernemers leren van straatkinderen?
Aan wat denk je eerst als je het onderwerp straatkinderen aanraakt: – criminaliteit – lijm snuiven – armoede – miserie – streetgangs – diefstal – … er lopen zo’n 300 miljoen straatkinderen rond in de wereld maar toch, als je … Continue reading
Posted in Uncategorized
comment installer l’axe, le jonc, l’oeillet et le réceptacle de la série 4002
Comment remettre en état ou remplacer complètement les camlocs en place actuellement 1) Installer l’oeillet à l’aide du jonc dans le panneau supérieur + = Installer l’œillet 4002-0-1 dans le trou préparé ; Pmax = 2,4mm Si le panneau est supérieur … Continue reading
Posted in Français
Which material exactly are the stainless steel saving time latches made
Saving time latches are made of grade 304 stainless steel they are sold into raw finish, this means that they did not receive any polishing or treatment.
Posted in Latches
southco alternatives for part C2-33-15 and part C2-33-25 on stock
Anemo is proud to have on stock alternative southco handle parts. The following handle part numbers are on stock C2-33-15 = handle = AEH-07014 C2-33-25 = handle with lock = AEH-08014 please do consult us for parts C2-33-15 and C2-33-25 … Continue reading
Posted in Products - leave a comment, handles
Anemo apears in “Ondernemers” newspaper edition January 2012
The article is in Dutch language. Ondernemers is a monthly newspaper edited by the chamber of commerce in Belgium, province West-Flanders (VOKA) artikel ondernemers
Posted in Anemo in the news
Do you supply NSN (nato stock numbers) parts?
Yes we supply NSN parts. here is a list of parts we currently hold on stock: federal supply class 5325 Fastening devices NSN number camloc PN old camloc PN 5325123336807 991S01-18-1BP 5325144573747 991S01-7-1AGV 991S01-7-1AF 5325145273338 991S01-12-1AGV 991S01-12-1AF 5325145273339 991S01-15-1AGV 991S01-15-1AF … Continue reading
Posted in Products - leave a comment, Quarter Turns
Anemo is master distributor for Asia & India
Anemo is the official distributor for the camloc product range for the Asian and Indian market. We support customers in need of camloc fasteners either direct or through distribution, you can easily source your camloc fasteners and receive the necessary … Continue reading
Posted in Anemo News
How to fix lights with the 991F quarter turns
this is the application of an offset wing head 991F camloc stud Beaucoup de fabricants d’éclairage utilisent notre système, il s’agît d’un (wing head) tête à oreilles 991F camloc quart de tour
Posted in Quarter Turns
Can keenserts be installed in cast iron?
yes they can, however we recommend the use of a prebroach tool more information: http://www.anemo.eu/blog/is-there-a-tool-to-pre-broach-the-key-slots-for-the-keenserts/
Posted in Keenserts
Anemo launches product idea = easy panel connect system = EPCS
The EPCS is an innovative new product idea suitable for fastening panels which are difficult to handle like particularly large or very thin panels, or where the worker is restricted in his ability to handle the panels, for example on … Continue reading
Posted in Anemo News
Can keenserts be produced in another material?
There is manufacturing capability to make the keenserts in another material. Carbon steel is something that customers request regularly. The factory unit has made them already in other materials for sure. General lead-time would be 16 weeks Other material options: … Continue reading
Posted in Keenserts
What’s the difference between V50R3-1-1AGV and new V50R1-1-1AGV?
V50R3-1-1AGV has a thicker thickness 1,5mm because it was time to change the tooling, we did some improvements, which resulted into a thinner plate, of only 1,2mm the new part number is V50R1-1-1AGV The same applies for the stainless steel … Continue reading
Posted in Quarter Turns
What’s the difference between 991S01-*-1AGV and 91S2-*
91S2-* is made of steel cadmium plated and has a hex head 9/16″ 991S01-*-1AGV is made of steel zinc plated RoHS conform CrVI free and has a hex head for a key 13mm We can for you produce all 991s01-*-1AGV … Continue reading
Posted in Quarter Turns
Anemo in “Nieuwsblad” looking for a sales engineer
download the pdf here: nieuwsblad anemo this is the original text: Technologiebedrijf levert wereldwijd Bedrijfsleider vindt maar geen Sales engineer Anemo gevestigd in het kleine Leisele is een wereldwijd gekend hoogtechnologisch bedrijf. ‘Toch vind ik nergens een sales engineer’’, zegt … Continue reading
Posted in Anemo in the news
changes to the 4002 series
The 4002 series will undergo serious changes during the year 2012. All part numbers will change to new part numbers The mechanical caracteristics and dimensioal properties remain the same. It’s only the zinc plating ! In stead of yellow zinc plated … Continue reading
Posted in Quarter Turns
La référence de l’axe va changer de la série 99F
99S10-01A1 va devenir V99S10-01AG ceci ne changera rien au caractéristiques mécanique, dimensionnel ou zinguage. C’est seulement une nouvelle référence les pièces sont complètement interchangable. vieux référence nouvelle référence 99S10-01A1 V99S10-01AG 99S10-03A1 V99S10-03AG 99S10-05A1 V99S10-05AG 99S10-07A1 V99S10-07AG 99S10-09A1 V99S10-09AG 99S10-11A1 V99S10-11AG … Continue reading
Posted in Français
Why is the 2600 stud not sitting completely flat on the surface of the plate?
it has always been this way that there is a small gab of 0,25 +/-0,1 so: 0,35 or o,4mm is ok. The outer edge of the collar can be irregular depending on the deep drawing process which can lead to … Continue reading
Posted in Quarter Turns
Willy Naessens en zijn 10 geboden
Willy Naessens, en zijn 10 geboden. Wie zou daar niet geïnteresseerd in zijn? Wel het was de moeite waard, zodat u later ze kunt raadplegen, lijst ik ze hier op: 1) U moet familiaal geruggesteund zijn Blijf uit de financiële … Continue reading
Posted in Uncategorized
Changement de la série 4002
la série 4002 va avoir des changements important courant l’année 2012 tous les références vont changer ver des nouvelles références. Les caractéristique mécanique et dimensionnel resteront la même. C’est seulement le zinguage. Au lieu de zingué bichromaté jaune on change … Continue reading
Posted in Français
Where in the UK do you have distribution?
Anemo mostly sells direct to it’s customers in Great Britain. you do not have to worry about transport costs, as our prices are including transport to GB In case your company needs to buy through a local distributor, then please … Continue reading
Posted in Anemo News
What’s the difference between 51L and V951L camloc latches?
The picture on the left shows the old way of how the secondary lock looks like. This is not anymore produced by camloc in this way. Due to another secondary lock, you have also another way the hook is fastened. … Continue reading
Posted in Ask our engineers Q&A, Latches
Is the part number V95H07-1-1BP the same as V95H07-1-1BC?
Question: We have received the shipment, but I have a question. The part number we have received is V95H07-1-1BP. Is this the same as the V95H07-1-1BC? What is the difference between the “BP” and the “BC”. Answer: What I know … Continue reading
Posted in Latches
PHLIPPO SHOWLIGHTS is the 500th customer at Anemo
We started of with our first customer in Belgium, the company Total Petrofina. We now have helped 500 companies worldwide. It was guessing who and which country would have the magical number 500, since Anemo only sells 6% of it’s … Continue reading
Posted in Anemo News
Can I use a quarter turn for the body tail of a helicopter?
Here is my application: Answer: ¼ Turn are designed for closing lids and larger panels like a cowling of an Aircraft. Helicopter use it from small to medium large panels. The system is not designed for shear loads and structural … Continue reading
Posted in Faq, Quarter Turns
have tests been performed on the 4002-*WB?
Question: I would have a question in regards to the Fixed Wing Head 4002-*WB Stud Assy. 1- Have tests been performed in regards to vibration on the above mentioned studs, and has a certification been issued? A customer has requested … Continue reading
Posted in Uncategorized
How to install retaining washers 4002-SW-SS and 2600-SW?
The installation is done using a nose pliers tool. 1) place retaining ring on stud with slot aligned over left side of cross pin as shown on figure 2) snap retaining ring under cross pin using needle nose pliers then … Continue reading
Posted in Quarter Turns
Can you use keenserts in PEEK material?
Question: My inquiry was really to help out our designers in Italy, we are looking for a threadlocking insert that is well suited to use in unfilled PEEK. Currently we are using a different type which is really only intended … Continue reading
Posted in Keenserts
In which city or province in China do you have a distributor?
Anemo mostly sells direct to it’s customers in China. you only require a FEDEX, DHL , UPS, TNT, … or other account number. and you need a customs registration code. In case your company needs to buy through a local … Continue reading
Posted in Anemo News
In which states of the USA do you have currently distributors?
Anemo mostly sells direct to it’s customers in the states. you only require a FEDEX, DHL , UPS, TNT, … or other account number. In case your company needs to buy through a local distributor, then please find here the … Continue reading
Posted in Anemo News
Anemo sells camlock couplings
The Belgian Railways have selected Anemo Engineering for the supply of their camlock couplings needs. we are proud that we have helped them to source this part. here is an image of a camlock coupling We will soon integrate a … Continue reading
Posted in Anemo News, Couplings (English)
What is V1A steel?
V1A is similar to 1.4305 or aisi 303 (this is the free machining version of 304 via addition of sulfur and phosphorus AISI Type 303 Category Steel Class Stainless steel Type Austenitic standard Common Names Chromium-Nickel steel Designations France: AFNOR Z … Continue reading
Posted in Ask our engineers Q&A
Which values Anemo stands for?
Anemo likes to do business with people and or companies that are – righteousness, justice – honest – responsible – respectfull – clear With anemo we would like to guarantee our employees an income by selling a variety of products … Continue reading
Posted in Anemo News
What are keenserts?
keenserts are high strength threaded inserts made from stainless steel 1.4305. Keenserts are passivated according to EN 2516. The standard product range have metric thread dimensions. Imperial dimensions and specials can be quite expensive for small quantities. Keenserts are used … Continue reading
Posted in Blog, Keenserts, Products - leave a comment
What is V2A and V4A stainless steel?
First of all we can confirm that the stainless steel used is an austenitic kind of stainless steel. In the SAE grade, it means it’s from the 300 numbers They contain a maximum of 0.15% carbon, a minimum of 16% … Continue reading
Posted in Ask our engineers Q&A
Is NSA55139 a valid part number?
After verification in the database system. The part NSA55139 should have some more suffix after it NSA55139-001 = 214-16D Receptacle, silicone bronze, cadmium plated with countersunk holes NSA55139-002 = 214-16 Receptacle, silicone bronze, cadmium plated with plain holes The most … Continue reading
Posted in Ask our engineers Q&A, Quarter Turns
Bombardier Mexico places major order
We received an order from Bombardier Mexico. they have ordered 26S39-9 camloc quarter turn stud that is nickel plated. The studs will be installed into trains, the nickel plated was selected because the parts look nicer. The project already started … Continue reading
Posted in Anemo News
what does S signify on your drawings of quarter turns?
The S length helps you determine the Stud length number. If you measure up this distance then you can calculate the stud length number S = 16,00 +( 0,76 x stud length number) However this method of reverse engineering does … Continue reading
Posted in Ask our engineers Q&A, Blog, Products - leave a comment, Quarter Turns
What’s the cost for a certificate?
1) The cost for a certificate of origin = 50 euros per shipment (example 1) this document is an official document issued by the local chamber of commerce. 2) the cost for a certificate of conformity = 25 euros per … Continue reading
Posted in Administrative questions
Is the minimum thickness of the plate essential?
Question: I wish to repair an M16 thread in a 16mm thick steel plate. The Keensert instructions say the minimum plate thickness is 24.5mm. Is this minimum thickness essential Answer: The thickness is not relevant when you know that the … Continue reading
Posted in Keenserts
Why should I use RoHS conform zinc plated instead of toxic cadmium plated parts?
Question: do you have any data/technical specifications etc that demonstrates that the zinc plated components are an adequate alternative for the original cadmium plating. I realise the dimensions and strength are the same but am interested in the material properties, … Continue reading
Posted in Ask our engineers Q&A, Blog, Products - leave a comment, Quarter Turns
Is there a replacement for part 2700-5 ?
Question: I have been advised by our supply personnel that P/N 2700-5 has been discontinued or cannot be sourced through the defense supply system. They have suggested P/N 27S3-5 as the alternative. I’ve noticed that this is a cross recess … Continue reading
Posted in Ask our engineers Q&A, Quarter Turns
Wat is de zin van het leven door abt Lode van de abdij van Orval
De zin van het leven: Abt Lode vertelde dat voor veel mensen de zin van het leven = het leven doorgeven. Nu, hij kon dat zelf niet toepassen wegens zijn celibaat en moest dus op zoek naar iets anders. Via … Continue reading
Posted in Uncategorized
How much weight can the strongest quarter turn hold?
The strongest quarter turn can hold 22000 Newton There exist also something that can hold 45000 Newton (but both have a delivery time of almost a year and are horrible expensive) My suggestion is to take a more standard version … Continue reading
Posted in Quarter Turns
Which table do I need to use to calculate the stud length with the 4002-N-B grommet?
Question: I got your images correctly. My question is about stud length table to culculate stud length no. Please see the page G-2 and G-3 of your Quarter Turn catalog. It’s showing stud length table for 4002 series, but I … Continue reading
Posted in Quarter Turns
What is the locking torque of a stainless steel joining lock nut?
the torque depends on the material class of the self locking nut Standard threads Quality class tightening tension in the bolt locking torque Nm torque kN 1st deturn 5th deturn in Nm MIN (µ = 0,20) MAX (µ = 0,12) … Continue reading
Posted in self locking nuts
Why use a joining lock nut to fasten compressor valves?
Your advantages to switch over to a joining lock nut: 1) Single piece joining lock nut that does not require specific knowledge or multiple tools for installation 2) A locking fastener with prevailing torque that functions completely independent of any … Continue reading
Posted in Ask our engineers Q&A, self locking nuts
WHAT TORQUES ARE APPLIED ON THESE NUTS WHEN USED ON VALVES?
The locking torque for class 8 material locking nuts can be find in this table, they are according to the norm DIN EN ISO 2320 Standard threads tightening Locking torque in N.m torque 1st turn 1st deturn 5th deturn in … Continue reading
Posted in Ask our engineers Q&A, self locking nuts
Can we receive a certificate of Origin with the shipment?
Yes, you can: The cost per certificate of origin = 50 euros The delay of shipment with certificate of origin is maximum one day extra. the certificate of origin is in fact mostly needed for companies located in countries that … Continue reading
Posted in Administrative questions
Pregunta en Espanol
Question: Para una aplicación especial necesitamos un tipo de cierre rápido y abatible para agilizar nuestro proceso de producción, como puede ser el: 50E19-*AGV (Part No.). Por lo que estamos interesados en recibir información sobre este tipo de cierres así … Continue reading
Posted in Spanish
wat is het partnumber TR17558S
De TR17558S is een refill kit, met 16 stuks (M10x1,25 + M14x1,5) ; KNM10x1,25 (let op dit is met fijne draad) Die TR nummers zijn eigenlijk enkel een verpakkingswijze. U vertelde me M8 binnendraad Ik stel aan u voor de … Continue reading
Posted in Dutch
Anemo secures major deal with Areva
Anemo succesfully supplied Areva with camloc quarter turns in August 2010. After this first customer experience, Areva came back to Anemo with the request to deliver different parts. Although the parts were not standard parts and we had to investigate … Continue reading
Posted in Anemo News, Blog
Tagged southco goujon hinge plate CNC parts
What’s the strength of the 40S41 series?
The 40S41-*S is made of high strenght stainless steel. The working strength is 2,0 kN, the ultimate tensile strength is 4,3 kN for the 40S41 studs. They are very hard to get parts and very costly In case you select … Continue reading
Posted in Ask our engineers Q&A, Faq, Quarter Turns
I need to know the technical information on your part no:CAMLOC 4002-SW
Question: Is this part number a retaining washer and is this MATERIAL: SPRING STEEL We are looking for a retaining washer that is made out of spring steel? What can you suggest? Answer: The material is indeed spring steel. However, … Continue reading
Posted in Ask our engineers Q&A, Faq, Quarter Turns
comment régler un vérin?
Le vérin peut être réglé après montage. Actuellement vous avez par exemple 1200N, ce qui est trop pour votre application. On peut réduire la force par utiliser le vis de réglage comme indiqué sur la photo. Faites attention ! Une fois … Continue reading
Posted in Français
Is there a recommended and/or specified depth for the insertion of the kees of keenserts?
Question: Realizing that flush with the threaded insert is typical, in the situation where the kee has been somehow driven deeper than flush where the opposite end of the kee protrudes from the end of the insert, at what depth … Continue reading
Posted in Ask our engineers Q&A, Faq, Keenserts
what’s the corrosion resistance difference between 26S8-3D and V26S02-3AGV ?
The stud V26S02-3AGV is identical in form, fit and function to the old version 26S8-3D. The only difference is the surface treatment. 26S8-3D was coated with zinc and yellow chromate (and is now obsolete) corrosion resistance according salt spray test … Continue reading
Posted in Ask our engineers Q&A, Faq, Quarter Turns
what’s the life cycle expectancy of a stainless steel anti galling silver plated keensert?
Question : I am enquiring about the internal thread of the Keensert. I would like a rough estimation of the life cycle of the anti galling properties of the thread, assuming a good quality stainless steel bolt is used. I … Continue reading
Posted in Ask our engineers Q&A, Faq, Keenserts
Ik ben op zoek naar een snelsluitsysteem
Question: Geachte, Ik ben op zoek naar een snelsluitsysteem om kadeers op een snelle mannier tegen/onder/boven elkaar vast te maken. Deze bestaan uit vierkante aluminium profielen die op elkaar gezet/gehangen worden. De profielen hebben een dikte van 4 cm. Dus … Continue reading
Posted in Nederlands
Can you increase the tensile load of the fastener 713S95-1AG?
Question: Actually, we’re developing a new product using your quarter-turn cam-lock (713S95-1AG) with 200 N of max. axial tensile load. Is it possible to modify the spring to increase axial force of the camloc? Answer: We’ve sold already some of … Continue reading
Posted in Ask our engineers Q&A, Faq, Quarter Turns
Y-a-t-il un risque de perdre la fonction autoblocant du keensert?
Question: Je m’adresse à vous pour répondre à une question concernant les filets rapportés autoblocant. Y-a-t-il un risque de perdre la fonction autoblocant ? Autrement dit, combien de fois peux-t-on installer et retirer une vis dans un keenserts autoblocant ? Réponse: … Continue reading
Posted in Francais
I could not find the shim used on your 4002 series in the catalogue?
Question: On page G1 of the ¼ turn Cam lock catalogue, the type 3 assembly shows a shim in the assembly. The shim is not in the catalogue, do you provide a shim forthe type 3 Receptacle. Answer: Yes we … Continue reading
Posted in Ask our engineers Q&A, Faq, Quarter Turns
côtes instructions et résistance à la température de la grenouilllère ECL208-BP
Question: Je souhaiterai avoir des renseignements plus précis sur la cotation de la grenouillère ECL208-BP. Avec notamment les côtes et instruction de montage pour un bon serrage de deux pièces. Pouvez-vous m’indiquer également si ce produit résiste à une haute … Continue reading
Posted in Français
I would like to enquire as to whever part numbers 99R10-01A1 and 99E10-01 would be availible with a diameter smaller than the 11mm stated
no there is no availability of a smaller receptacle in these series. the stud would not be able to enter into the receptacle. something smaller could be designed in case you have a project with a yearly volume of 50000 pieces … Continue reading
Posted in Ask our engineers Q&A, Faq, Quarter Turns
What rivet size goes together with the holes in your products
For hole size 2,5 and 2,6 - rivets with 2,5 mm diameter or blind rivets with 2,4 mm diameter For hole size 3,1 – rivets and blind rivets with 3,0 mm diameter For hole size 3,3 - blind rivets with 3,2 mm diameter For hole size 3,6 - … Continue reading
Posted in Ask our engineers Q&A, Faq, Latches, Quarter Turns
I do not understand the sealing function of the 2600F series?
As a customer you need to order both seals. AN6227B6 is the sealing which has to be installed under the spring cup to seal the outer area. AN6227B3 under the head of the stud to seal the inner area. take … Continue reading
Posted in Ask our engineers Q&A, Faq, Quarter Turns
conversion of GPM to LPM & PSI to BAR
conversion of flow values = gallons per minute to liters per minute conversion of pressure values PSI to bar GPM LPM 2 7,6 2,5 9,5 3 11,3 3,5 13,2 4 15,1 4,5 17,1 5,5 20,8 6 22,7 8 30,2 10 37,8 PSI bar 10 0,69 20 1,38 30 2,07 40 2,76
Is my stud length number calculation correct?
Question: We are currently using a Knurled Head Camloc fastener P/N: 26S34-2B on our CN-235 Aircraft and I am researching for one of greater length for a modification. It has a type 1 receptacle and using the formula in the … Continue reading
Posted in Ask our engineers Q&A
déterminer le numéro de longueur de l’axe à l’aide du valeur S
Question: Boujour, nous sommes une société qui fabriquons des paramoteurs drones et nous utilisons actuellement des vis 1/4 de tour Camloc sur notre appareil, que nous achetions chez un revendeur ULM. Nous sommes actuellement en train de développer notre appareil … Continue reading
Posted in Français
