The TWO NUT is in fact one nut however consisted of two halves. Both are joined together froming the TWO NUT.
we call it also the seperatable nut system
two-nuts are simple to use and have following advantages:
(take care: minimum order value expected to be at 5000 euros)
1) you do not have to make a thread on the complete rod of a long tension bolt!
2) If the tension bolt is damaged (bent) then you can still apply the nut
3) you can save a lot of time in case you need to install a nut on a very very long rod, then it's just clicking it on the correct spot, where you want the nut
(ideal for temperary fastenings)
4) hard to reach places
5) repair and maintenance in high corrosive environments
available sizes:
PART NUMBER | THREAD | TOOL SIZE [MM] | TN934 HEIGHT [MM]| |
TN934-M6 | M6 | 10 | 6 |
TN934-M8 | M8 | 13 | 8 |
TN934-M10 | M10 | 17 | 10 |
TN934-M12 | M12 | 19 | 12 |
TN934-M14 | M14 | 22 | 14 |
TN934-M16 | M16 | 24 | 16 |
TN934-M20 | M20 | 30 | 20 |
TN934-M24 | M24 | 36 | 24 |
TN934-M30 | M30 | 45 | 30 |
TN934-M36 | M36 | 55 | 36 |
TN934-M39 | M39 | 60 | 39 |
PART NUMBER | THREAD | TOOL SIZE [MM] | HEIGHT [MM] | HEIGHT OF COLLAR[MM] | DIAMETER OF COLLAR |
TN6331-M6 | M6 | 10 | 9 | 3 | 14 |
TN6331-M8 | M8 | 13 | 12 | 3,5 | 18 |
TN6331-M10 | M10 | 17 | 15 | 4 | 22 |
TN6331-M12 | M12 | 19 | 18 | 4 | 25 |
TN6331-M14 | M14 | 22 | 21 | 4 | 28 |
TN6331-M16 | M16 | 24 | 24 | 5 | 31 |
TN6331-M20 | M20 | 30 | 30 | 6 | 37 |
TN6331-M24 | M24 | 36 | 36 | 6 | 45 |
TN6331-M30 | M30 | 45 | 38 | 10 | 57,5 |
TN6331-M33 | M33 | 50 | 41 | 12 | 59,5 |
TN6331-M36 | M36 | 55 | 44 | 13,5 | 65 |
TN6331-M39 | M39 | 60 | 47 | 15 | 65 |
available in:
stainless steel (class 8 or class 10) (class 10 = high strength)
steel zinc plated (class 8 or class 10)
polyamide
Titanium
brass
copper
Aluminium
specials: (for easy manupulation of the two nut)
join two rods together:
joint two blocks together
join a cap nut together (rod + threaded rod)